mastodon.ie is one of the many independent Mastodon servers you can use to participate in the fediverse.
Irish Mastodon - run from Ireland, we welcome all who respect the community rules and members.

Administered by:

Server stats:

1.6K
active users

#fritzbox

6 posts6 participants0 posts today

Seit einigen Tagen kann ich mit #Fritzbox und #FritzFon kein #Internetradio mehr hören. Hat jemand eine Idee, woran das liegen könnte?

Das Handset zeigt den Sendernamen und die Uhrzeit an, spielt aber keinen Stream ab. Nach einer Weile geht es in den Homescreen zurück.

Ich habe nichts an den Einstellungen oder sonst geändert. Die Geräte sind auf dem aktuellen Patch-Level. In den letzten Tagen gab es meines Wissens auch kein Update.

was schade ist:

Eine Fritzbox kann nicht (zumindest meines Kenntnisstands nach) einen TFTP Verweis auf einen PXE (Aus dem Netzwerk booten) Server erstellen.

Lösung:
Aktuelles PI Hole, DHCP drauf aktivieren und dann:
Settings -> All Settings -> Miscellaneous
bei "misc.dnsmasq_lines" folgendes eintragen:

# Standard PC BIOS
dhcp-match=set:bios,60,PXEClient:Arch:00000
dhcp-boot=tag:bios,netboot.xyz.kpxe,,192.168.10.25
# 64-bit x86 EFI
dhcp-match=set:efi64,60,PXEClient:Arch:00007
dhcp-boot=tag:efi64,netboot.xyz.efi,,192.168.10.25
# 64-bit x86 EFI (obsolete)
dhcp-match=set:efi64-2,60,PXEClient:Arch:00009
dhcp-boot=tag:efi64-2,netboot.xyz.efi,,192.168.10.25
# 64-bit UEFI for arm64
dhcp-match=set:efi64-3,60,PXEClient:Arch:0000B
dhcp-boot=tag:efi64-3,netboot.xyz-arm64.efi,,192.168.10.25

192.168.10.25 wird durch die IP Eures PXE Servers ersetzt.

#netbootXYZ #FritzBox #PiHole #DHCP

Replied in thread

@tarnkappeinfo
Hallo,
schöner Artikel - ich habe jedoch ein paar Nachfragen dazu:

* Warum hat Ihr in Eurem Artikel den neuen europäischen DNS-Resolver DNS4EU nicht erwähnt? Gib es bei dem irgendwelche Gründe, die gegen eine Nutzung sprechen?

* Ihr habt hier die Verwendung von DNS over HTTPS beschrieben - gibt es einen Grund DNS over TLS (DoT) _nicht_ zu verwenden?

* Ihr beschreibt nur die Einstellungen für einen Windows 11-Rechner? Keine Beschreibung für das Smart-Phone - egal ob Android oder IOS - für den Betrieb außerhalb des Heimnetzes ... Spricht etwas gegen die Eintragung auf dem Home-Router (z.B. FRITZ!Box) für alle Geräte im Heimnetz?

#DNSoverHTTPS #DNSoverTransportLayerSecurity
#Fritzbox
#Android #IOS

Why is copying files from Android to PC so hard?

This used to be easy: connect by USB, and access your phone from the PC as USB storage. Now they've got a fancy MTP protocol that is very advanced at not making it work.

Bluetooth? Doesn't work. Some of my devices can connect over bluetooth, but not my phone and PC.

KDE Connect? Should make it really easy, but despite them knowing each other by IP, it doesn't work. They both claim the other isn't there.

You know what worked? Sticking a USB stick in my Fritz Box, using my phone's Fritz Box app to share photos to the USB stick, and then sticking the USB stick in the PC. That worked, almost reliably (it missed 2 files on the first try).

It's not just a linux issue, sharing to my son's Windows PC was at least as bad. (He's suddenly eager to upgrade to Steam OS, by the way.)

Mal was nerdiges: ich hab hier wunderbares Internet mit Dual-Stack vom regionalen Anbieter, das mir per #Fritzbox in die Wohnung kommt. Wenn ich mich mit dem WLAN verbinde, hab ich auch erstmal feinstes #IPv6 und alles funktioniert.

Nach ner Weile geht dann aber nur noch v4 (laut test-ipv6.com/ z.B.) – v6 nicht mehr. Die FB hat nachwievor stabil v6 und über meinen Heimserver komm ich auch weiterhin per v6 raus; es scheinen nur Geräte im WLAN betroffen.

Wo fang ich da an zu debuggen?

test-ipv6.comTest your IPv6.This will test your browser and connection for IPv6 readiness, as well as show you your current IPv4 and IPv6 address.